1. The system should be installed only by Mirae staffs.
Fire, electric shock and physical injury could result.
2. Firmly connect the power connector.
Fire could be caused by contact failure.
3. Check the safety related I/O.
(See the I/O check procedure in the Operation Manual.) Physical
injury could result.
4. Make sure to grounding the system.
Electric shock could be caused by leakage of electricity.
5. The system should be only operated by persons who have
completed the Mirae training session.
System error, electric shock or physical injury could result from
incorrect operation.
6. Do not connect or disconnect connectors as long as the unit is
plugged in.
Electric shock could result.
7. Make sure of the fan ventilator is not closed or.
Fire or malfunction could be caused by overheating.
8. Do not put unauthorized parts.
Fire, electric shock or physical injury could result.
To Next Page
Loading...
