Check the following before switching on the machine.
1. Ensure that the system power, air line and SMEMA cable
are connected exactly.
2. Perform visual inspection on the machine and ensure that no
foreign materials exist inthe working area of each gantry axis.
3. Close the safety door.
Safety Instructions
Safety Instructions
Make sure to observe the following instructions to ensure safety
during operation.
1. Both safety covers should not be opened by any persons unfamiliar
with operation and functions of the machine. Safety cover should be
opened to carry out only the work defined in the operation manual.
2.Do not put hands, head or other body parts into the moving parts of
the machine during operation.
3. Any modification that could affect the functions of the
machine is not permitted. Serviceis impossible for troubles caused
in any part modified without Mirae’s admission.
4. Calibration, adjustment or maintenance of the machine
should be done only by thosepersons who completed Mirae’s
education program or by equally competent persons.
5. Use only standard maintenance parts authorized by Mirae.
Using non-standard parts could exert a critical influence on safety
or incur performance degradation of the machine. Mirae is not
To Next Page
Loading...
