1. Do not use unauthorized tools.
Physical injury could result.
2. Installation of the system should be placing on a stable ground. Severe
noise could be created and an accident may occur if the ground
cracks.
3. Arrange the wires after installation.
Fire or malfunction could be caused by damaged cables.
4. Once installation is completed, remove unnecessary tools around the
system.
Electric shock or malfunction could result.
5. Do not step on the system.
Physical injury could be caused by falling into the system.
6. Do not impact against the monitor.
Physical injury could be caused by breakage.
7. Remove magnetic objects near the magnet stator (X, Y driving units).
Malfunction could result.
8. Remove any unnecessary objects inside the system before operating.
Electric shock or malfunction could result.
9. Do not place objects around the emergency stop buttons.
The emergency button may not be pressed in an emergency.
To Next Page
Loading...
