Mirae Mx200 - Page 234

7-2 Mx100/200 Series Operation Manual
R-AXIS ORIGIN OFFSET
SETTING......................................................................7-6
RECHECK HEAD OFFSET AND RECOGNITION
OFFSET.............................7-7
ANC
TEACHING....................................................................................................
....7-7
CRO (CEMERA RECOGNITION OFFSET)
COMPENSATION........................7-8
Machine Type After machine power on, run the following on the
Mr.Terminal: Setting -> ld(0,0,”alpha.o”) (Enter)
-> loadMCS (Enter)
A window to define Machine Type opens as shown below.
-> *** Machine Type ***
-> Current Machine Type = 0x270F
->
-> *** System Model ***
-> 1 : MPS1010 2 : MPS1010P-CSU 3 : MPS1010P-
TFU
-> 4 : MPS1020 5 : MPS1020P-CSU 6 : MPS1020P-
TFU
-> 7 : MPS1030 8 : MPS1030P-CSU 9 : MPS1030P-
TFU
-> a : MPS1010QP-CSU b : MPS1010QP-TFU
-> c : MPS1020QP-CSU d : MPS1020QP-TFU
-> e : MPS1030TP-CSU f : MPS1030TP-TFU
-> g : Mx110/MPS1025 h : Mx110TP
-> i : MPS1010a k : Mx110P/MPS1025P
-> l : MPS1020QPa m : Mx310T
-> n : Mx310-DMD o : Mx310S
-> p : Mx110-DMC q : Mx110P-DMC
-> r : Mx110TP-DMC s : Mx120-DMC
-> t : Mx120P-DMC u : Mx240
-> v : Mx310QP w : Mx310HP
-> x : MX200 y : MX200P
-> A : MX100 B : MX100P