Mirae Mx200 - Page 383

Chapter 5 Solutions for Errors 5-
31
Booting parameter
[Errors]
 Booting error during machine initialization  Boot
data error  Updated data change
Press any key to stop auto-boot…
0 auto-booting… boot device : hn processor
number : 0 host name : iris file name :
/export/home/jmy/vw/config/Kvme040/vxWorks
inet on ethernet (e) : 203.247.170.206 host
inet (h) : 203.247.170.18 user (u) : jmy flags (f)
: 0x0
target name (tn) : kvme080
Attaching network interface hn0... done.
interrupt:
< Boot data error >
Press any key to stop auto-boot…
0 auto-booting… boot device : hn processor number : 0 host name : mirae file
name : vxWorks inet on ethernet (e) : 210 .113 . 220 . 200 host inet (h) : 210
.113 . 220 . 83 user (u) : Alpha ftp password (pw) : Alpha flags (f) : 0x8
target name (tn) : kvme080
startup script (s) : autorun
< Normal boot data on the Mrterminal >
 Cause: KVME-080 board failure
4. VME RACK
 Precautions when replacing a VME rack internal board
Do not carelessly change the specified board location.
Pay attention to DIP SOFTWARE setting when replacing a bad board.