A-12 C-Feeder User Manual
Pull the ‘Locking Handle’ back, and mount the As the feeder contacts the feeder base,
feeder on the feeder base. push the ‘rocking handle’ and fix the feeder
to the feeder base.
Note
Error will occur if you failed to return the locking handle back to its position within 5 seconds after the feeder is mounted on the feeder
base (power is supplied).
Make sure to return the locking handle within 5 seconds.
If a time over error occurs, follow the above steps to clear the error.
Trouble Shooting
To Next Page
Loading...
