Operation and Maintenance
Value Parameter 1 (XXYY) Parameter 2: Parameter 3:
Reason (XX)
Action (YY)
64
E-mail client Additional info
depending on
the e-mail client
(XXYY)
10 E-mail text too
long (body)
User name
authentication
(LOGIN)
11 E-mail attachment
too large
Password
authentication
(LOGIN)
12 Format of e-mail
attachment not
supported
Authentication
(PLAIN)
13 No e-mail recipient
address
Prepare encrypted
authentication
(CRAM-MD5)
14 Invalid e-mail
recipient address
Encrypted
authentication
(CRAM-MD5)
15 Invalid e-mail
sender address
Preparing to send
next e-mail
6.5.1.2 Event tables
Event tables list all the event messages the system is capable of generating (see Event types, in
alphabetical order).
There are 7 event tables. After a first start, all event tables are assigned at least one destination. This
assignment can be modified in the Message destinations view. Each event table can be configured
individually. This means it is possible with a filter to decide which event message – if any – should be sent
to a particular signal destination either immediately, with a delay or not at all.
• No event:
This type of incoming event messages are never sent to the linked destination.
64
Action carried out by the SMTP client at the point when the error occurred.
Release 7.1
253 System Manual for Mitel SMB Controller
To Next Page
Loading...
Need help?
General
