System Overview
1. Navigate to the view Configuration - Software - System Software and agree to the EULA.
2. If your SMB Controller has internet access, click Firmware server... to see a list of available system
software (e.g. “Mitel-SMBC_Management-1.1.9.1_Helium.zip”). Then click Upload on the line of the
system software you want to upload.If your SMB Controller has no internet access, click Browse... and
select the system software you have downloaded already. Then click Open.
• The upload begins. You can view the progress with a progress indicator.
• After the upload is finished successfully, the name of the file is added to the system software file list.
3. Click Install on the line of the uploaded system software.
• The installation begins. You can view the progress with a progress indicator.
• Once the installation is finished successfully, a restart of the SMB Controller is executed
automatically.
• As soon as the SMB Controller reaches the normal mode (SYS LED is blinking slowly green) you
can log in again.
Upload and install the MiVoice Office 400 application software
Note:
Usually this step is only necessary for new installations but may also be necessary after an update of
the SMB Controller system software. Be sure to save the MiVoice Office 400 configuration data if there
was already a MiVoice Office 400 application software installed.
1. Navigate to the view Configuration - Software - Applications and agree to the EULA.
2. If your SMB Controller has internet access, click Download server... to see a list of available application
software (e.g. “mivo400-8923a0-r3.lib32_aarch64_ilp32.rpm”). Then Click Upload on the line of the
application software you want to upload.If your SMB Controller has no internet access, click Browse...
and select the application software you have downloaded already. Then click Open.
• The upload begins. You can view the progress with a progress indicator.
• After the upload is finished successfully, the MiVoice Office 400 application is added to the
application file list.
3. Click Install on the line of the uploaded application.
• The installation begins. You can view the progress with a progress indicator.
• After the upload is finished successfully, wait a few minutes until the application is up and running.
• The MiVoice Office 400 communication server is now ready for further initialization and configuration
steps.
Initialize the communication server
1. Open a browser window and enter the IP address of your SMBC communication server without the port
(Example: http:\\10.100.98.50)
WebAdmin opens in your web browser and shows the Sales channel selector view.
Release 7.1
System Manual for Mitel SMB Controller 34
To Next Page
Loading...
Need help?
General
