Mitsubishi Electric CR800 Series - Page 100

86
The method of comparing position variables is changed since this software
Ver.2.3.
When comparing the programs by Ver.2.2 or before of this software, position variables were judged
different if the expression of value of each elements are different as follows. Since Ver.2.3, it is changed
to judge the same position variable when the value of each element of a position variable is coincides.
No.
Example of variable of object of comparison
1
P1=(1.00,2.00,3.00,4.00,5.00,6.00)(7,0)
P1=(1.000,2.000,3.000,4.000,5.000,6.000)(7,0)
2
P1=(1.00,2.00,3.00,4.00,5.00,6.00)(7,0)
P1=(+1.00,+2.00,+3.00,+4.00,+5.00,+6.00)(7,0)
3
P1=(1.00,2.00,3.00,4.00,5.00,6.00)(7,0)
P1=(1.00, 2.00, 3.00, 4.00, 5.00, 6.00)(7, 0)
CAUTION