Mitsubishi Electric CR800 Series - Data; Jog

165
17.4.9.3. Data
“Temp. in RC output req” and “During output Temp in RC” parameter is available with Ver.2.4 or later of this
software. Moreover, the software version of the controller which can use this parameter is as follows.
Controller
S/W Ver. of the controller
CR750-D/CRnD-700
Ver.S1c or later
CR750-Q/CRnQ-700
Ver.R1c or later
CR800-D/R/Q
Can be used with all versions
17.4.9.4. Jog