221
19.1.5.12. Menu button
You can place menu buttons at the specified position. This function can be used with this software Ver. 4.1 or later,
Software Ver.1.40S or later of RT Toolbox 3.
1) Tap <a> where you want to create the menu button. The menu button uses this position as the left end and
uses 2 squares.
2) Select the menu button <b> on the [Select Item] screen.
3) On the [Create menu button] screen, select the menu button <c> to be arranged.
At this time, the execution button image is displayed at the lower left of the screen.
4) Tap the [OK] button. <d>
To Next Page
Loading...
