Mitsubishi Electric CR800 Series - Operation of User Definition Screen; Displaying the User Definition Screen

219
19.1.5.11. Operation panel button
You can place buttons such as [Start] on the operation panel at the specified position. This function can be used
with this software Ver. 4.1 or later, Software Ver.1.40S or later of RT Toolbox 3.
1) Tap <a> where you want to create the OP button. The OP button will be placed in this position.
2) Select the OP button <b> on the [Select Item] screen.
3) On the [Create operation panel button] screen, select the OP button <c> to be arranged and tap [OK] <d>.
<a>
<b>
<c>
<d>