Mitsubishi FX-20P-E - Buzzer Sound

FX-20P-E Handy programming panel Others Function 10
10-19
10.7 Buzzer sound
• Adjust the sound volume of the buzzer issued when a key is input.
Buzzer sound adjusting condition
PLC
status
RUN:
✓
STOP:
✓
Valid memory Inbuilt memory:
✓
RAM cassette:
✓
EEPROM
cassette:
✓
EPROM
cassette:
✓
ONLINE MODE FX
1.OFFLINE MODE
2.PROGRAM CHECK
3.DATA TRANSFER
In the step 2)
Display example
6.BUZZER LEVEL
In the step 3)
1)
2)
3)
OTHER
Key operation
4)
Start up the HPP
in the online or
offline mode.
6
Select "BUZZER LEVEL".
Or place the cursor on "BUZZER LEVEL", then press the
[GO] key.
Adjust the sound volume in 10 steps by pressing the
cursor control keys.
As the bar is longer, the sound volume is larger.
Press the [OTHER] or [CLEAR] key to return to the others
mode menu display.
.
.
.