Mitsubishi FX-20P-E - 6 Program Insert Operation; Outline of Insert Operation

Program Insert Operation 6
6-1
6. Program Insert Operation
6.1 Outline of insert operation
Read a program, and insert an instruction or pointer in a specified position.
An instruction or pointer is inserted in a position above the step specified by the cursor. (Lines not
displaying the step No. cannot be specified.)
After the inserted position, each step No. is automatically carried up. (The display is shifted down.)
When inserting an instruction or pointer near the currently read program, directly move the line
cursor to a desired position.
• Cautions on inserting an instruction
If an instruction is inserted while the program memory is full and has no free space, an error
message is displayed and insert is not executed.
Basic operation
INS/
DEL
GO
'
SP
Specify the first device.
Specify the second and later
devices.
P Pointer/Interrupt
No.
I
Insert an instruction.
Specify a pointer/Interrupt No.
Insert
function
Read
program.
Device
No.
Device
symbol
Instruction
word
Device
symbol
Device
No.
FX-20P-E Handy programming panel