FX-20P-E Handy programming panel Notes to Users 1
1-4
1.4 Function list
Function Online mode Offline mode
Read Reads (displays) sequence programs in PLC. Reads (displays) sequence programs in HPP.
Write
Writes sequence programs.
(Key inputs in the HPP
→
Program memory in the PLC)
Writes sequence programs.
(Key inputs in the HPP
→
Inbuilt HPP RAM)
Insert
Inserts instructions into sequence programs.
(Key inputs in the HPP
→
Program memory in the PLC)
Inserts instructions into sequence programs.
(Key inputs in the HPP
→
Inbuilt HPP RAM)
Delete
Deletes instructions from sequence programs.
(Key inputs in the HPP
→
Program memory in the PLC)
Deletes instructions from sequence programs.
(Key inputs in the HPP
→
Inbuilt HPP RAM)
Monitor Reads (displays) the operation status in PLC.
−
Te s t
Forcibly writes.
(Keys in the HPP
→
Memory in the PLC)
−
Others
• Changes over the program mode (online
→
offline).
• Checks programs.
(Checks programs saved in the PLC.)
• Transfers programs between the memory
cassette.
(Memory in the PLC
↔
Memory cassette)
• Modifies parameters. (Key inputs in the HPP
→
Program memory in the PLC)
• Converts device Nos. in sequence programs.
(Key inputs in the HPP
→
Program memory in the PLC)
• Adjusts the buzzer sound volume.
(Adjusts the sound volume of the buzzer issued
when a key in the HPP is pressed.)
• Clears the latch status.
(Key inputs in the HPP
→
Memory inside the PLC)
• Changes over the program mode (offline
→
online).
• Checks programs.
(Checks programs saved in the PLC.)
• Transfers programs between the HPP and the FX
Series PLC. (Inbuilt HPP RAM
↔
Program
memory in the PLC)
• Modifies parameters.
(Key inputs in the HPP
→
Inbuilt HPP RAM)
• Converts device Nos. in sequence programs.
(Key inputs in the HPP
→
Inbuilt HPP RAM)
• Adjusts the buzzer sound volume.
(Adjusts the sound volume of the buzzer issued
when a key on the HPP is pressed.)
• Transfers programs between the HPP and a
module. (Inbuilt HPP RAM
↔
Module)