Mitsubishi FX-20P-E User Manual

FX-20P-E Handy programming panel Others Function 10
10-9
10.5 Parameter
10.5.1 Outline of parameter settings
• In the online mode, set parameters to the memory in the PLC (memory cassette if it is
attached). In the offline mode, set parameters to the inbuilt HPP RAM.
• The default setting, the memory capacity, the entry code, the latch (backup against power
failure) range, file registers and the RUN terminal (only in the FX
1S
/FX
1N
/FX
2N
/FX
2NC
Series
PLC) can be set.
• Display and set parameters in the order shown below.
If not changing a displayed item, press the [GO] key to proceed to the next item. Press the
[CLEAR] key to return to the previous item. Press the [OTHER] key to return to the others
mode menu display.
OTHER
GO
4
Default
setting
Memory
capacity
Entry
code
Latch range
(M, S, C and
D)
File
register
CLEAR
RUN
terminal
Setting end
GO
CLEAR
GO
CLEAR
GO
CLEAR
GO
CLEAR
GO
Select the parameter
setting function.

Mitsubishi FX-20P-E Specifications

General

Brand	Mitsubishi
Model	FX-20P-E
Category	Control Panel
Language	English