Mitsubishi FX-20P-E - Page 109

FX-20P-E Handy programming panel Others Function 10
10-21
ONLINE MODE FX
1.OFFLINE MODE
2.PROGRAM CHECK
3.DATA TRANSFER
In the step 2)
Display example
7.LATCH CLEAR
M
S
C(16-BIT)
In the step 5)
1)
2)
3)
OTHER
Key operation
4)
Start up the HPP
in the online mode.
7
GO5)
Select "LATCH CLEAR".
Or put the cursor on "LATCH CLEAR", then press the
[GO] key.
Select a target device by pressing the cursor control
keys, then press the
[GO] key to clear the selected device.
Press the [OTHER] or [CLEAR] key to return to the
others mode menu display.
.
.
.