Mitutoyo CONTRACER CV-2100 - Page 25

1. Configuration
No. 99MBB793A
1-5
4. Power switch
Turns on and off of the power of the measuring main unit.
When the power is turned on, the LED lights up.
5. Stylus
A stylus to trace on the surface of a workpiece. The stylus should be changed in
accordance with workpieces and measuring purposes.
6. Arm
Holds the stylus. The arm moves in the Z-axis direction in accordance with the uneven
surface of workpieces.
The stylus should be changed in accordance with workpieces and measuring purposes.
7. Main arm
A section with which the arm is connected.
4
7
6
5