Mitutoyo CONTRACER CV-2100 - Page 75

5. TROUBLESHOOTING
No. 99MBB793A
5-5
Detector protection error
• 11: Lit (red)
• 5: Lit (green)
• 4: Lit (green)
• 2: Lit (green)
• 1: Lit (red)
The stroke range of the
Z-axis is exceeded.
Retract the stylus. If
problem is not resolved,
contact your dealer or the
nearest Mitutoyo sales
office/service center.
Detector is in contact
state.
• 11: Lit (red)
• 5: Lit (green)
• 4: Lit (green)
• 3: Lit (green)
• 1: Lit (red)
State of movement being
interrupted, because of
contact between the stylus
and workpiece during the
X-axis movement for other
than measurement
Check if the stylus is
interfered by any
obstacles. If problem is
not resolved, contact your
dealer or the nearest
Mitutoyo sales
office/service center.
11
10
9
8
7
6
5
4
3
2
1
Lit
Lit
11
10
9
8
7
6
5
4
3
2
1
Lit
Lit
Lit
Lit
Lit
Lit
Lit
Lit