Mitutoyo ID-C Series User Manual

54
5 Setting Parameters
No. 99MAH056A
(Short press) / (Long press)
Tips
• Press and hold the [F1] key to stop or cancel settings midway through.
• Asaresultofcalculationprocessing,adisplayvalueoverowerror(Err30)may
occur. For details, see
"8 Error Displays and Countermeasures" on page 83.
• Thedefaultsettingofthecalculationcoe󰀩cientisA=1.
• Ifthecalculationcoe󰀩cientAissetto00.0000,acalculationcoe󰀩cientsetting
error(Err91)willoccur.Pressthe[F2]keyandresetitsothatA≠0.
• Calculationcoe󰀩cientisnotconvertedevenwhentheunitsystemorresolutionis
switched.

Mitutoyo ID-C Series Specifications

General

Brand	Mitutoyo
Model	ID-C Series
Category	Measuring Instruments
Language	English