Morgana Digifold Pro CB - Section M Trouble Shooting; Creasing; Folding

Page83
SectionMTroubleShooting
Creasing
FaultReasonSolution
ErraticregisterofTooheavycreaseprofile.AdjustBladedepthto
thecreaserlowerthepressure.
Rollergapsettingsincorrectcheckwith80gsm.adjust.
(bettertosettightertodrive)
Damagedrollersurface.Replacerubberrollers
CreasingmechanismItshouldfeelverytight
drivebeltloose.Tightenbyadjustingmotor.
OutofsquarenessInfeedtoproller/bottomCheckparallelismwith80gsm
ofcreaserollerparallelism.stock,adjustasrequired.
Note-ifthecreasecontinuesto
beoutofsquarethisparallelism
maybeneededtobeoutof
parallel.
FirstsetoffoldrollersCheckasnoteaboveapplies.
parallelism.
FoldingoutofsquareFoldingtooclosetocrease.Movefoldfurtheraway.
withcreaseCreasebladetoowideforChangecreasingbladesetfor
stockthickness.narrowbladeset.
Foldrollersoutofparallel.Checkandsetallfoldrollers.
Inputrollersoutofparallel.Checkandsetallfoldrollers.
Jammingintopchute.Rollergapsettingsincorrectcheckwith80gsm.adjust.
(bettertosettightertodrive)
Folding
FaultReasonSolution
DigifoldPro
SYSTEM