UI (User Interface)
3-226 G24-L AT Commands Reference Manual April 15, 2008
The <code> parameter is a two-letter abbreviation of the language. The language codes, as
defined in ISO 639, consist of two characters, e.g. "DE", "EN" etc.
The following table shows the +CLAN parameters.
Example
AT+CLAN?
+CLAN: "EN"
OK
AT+CLAN=?
+CLAN: "DE","EN","IT","FR","ES","NL","SW","DA","PT","FI","NO","EL","TR"
OK
Command
Type Syntax Response/Action Remarks
Set
AT+CLAN=<code> OK
or:
ERROR
Set command sets the
selected language.
Read
AT+CLAN? +CLAN: <code>
The read command displays
the currently selected lan-
guage.
Test
AT+CLAN=? +CLAN: (list of <code>s)
Test command displays list of
supported language <code>s.
Table 3-149: +CLAN Parameters
<code> Description
DE German
EN English
IT Italian
FR French
ES Spanish
NL Dutch
SW Swedish
DA Danish
PT Portoguese
FI Finnish
NO Norwegian
EL Greek
TR Turkish
To Next Page
Loading...
