Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-251
b5 RFU, bit = 0
b6
b7
b8
Table 3-170: Profile Structure – Byte 7 (Multiple card proactive commands)
Bit Description
b1 Proactive SIM: POWER ON CARD
b2 Proactive SIM: POWER OFF CARD
b3 Proactive SIM: PERFORM CARD APDU
b4 Proactive SIM: GET READER STATUS (Card reader status)
b5 Proactive SIM: GET READER STATUS (Card reader identifier)
b6 RFU, bit = 0
b7
b8
Table 3-171: Profile Structure – Byte 8 (Proactive SIM)
Bit Description
b1 Proactive SIM: TIMER MANAGEMENT (start, stop)
b2 Proactive SIM: TIMER MANAGEMENT (get current value)
b3 Proactive SIM: PROVIDE LOCAL INFORMATION (date, time
and time zone)
b4 Binary choice in GET INKEY
b5 SET UP IDLE MODE TEXT
b6 RUN AT COMMAND (that is, class "b" is supported)
b7 2nd alpha identifier in SET UP CALL
b8 2nd capability configuration parameter (see 3GPP TS 11.14 version
8.9.0 Release 1999, subclause 9.1.6)
Table 3-169: Profile Structure – Byte 6 (Event driven information extensions)
Bit Description
To Next Page
Loading...
Need help?
General
