Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-7
Read Command
The following table shows the +CNUM parameters.
Example
AT+CNUM?
+CNUM: "David","035558278",129
AT+CNUM //MSISDNs supported
+CNUM: "PHONENUM1","2173848500",129
+CNUM: "PHONENUM2","2173848501",129
+CNUM: "PHONENUM3","2173848502",129
+CNUM:"","",0
+CNUM:"","",0
AT+CNUM //MSISDNs not supported
+CNUM: "Motomix","2233445",129
+CNUM:"","",0
+CNUM:"","",0
+CNUM:"","",0
$, List of All Available AT Commands
This command displays a list of all the AT commands supported by the G24-L.
Command Response/Action
+CNUM (MSISDN supported) +CNUM: [<MSISDN1
string>],<MSISDN1>,<MSISDN1 type>
[+CNUM: [<MSISDN2
string>],<MSISDN2>,<MSISDN2 type>]
[...]
+CNUM (MSISDN not supported)
+CNUM: <phone_number>
Table 3-3: +CNUM Parameters
<Parameter> Description
<MSISDN type> Phone number type
129 Use for local call
145 Use “+” for international access code
128 Unknown
Command Response/Action
AT$ List of available AT commands
To Next Page
Loading...
Need help?
General
