Motorola AT Commands G24-L - Page 406

AT Commands Alphabetical Summary
A-4 G24-L AT Commands Reference Manual April 15, 2008
+CCLK
This command reads/sets the
G24's current date and time
settings.
Page 3-73
+CCWA
This command controls the Call
Waiting supplementary service,
including settings and querying
of the network by the G24-L.
Page 3-21
+CDS
Unsolicited Response (New
SMS-STATUS-REPORT
Receipt).
Page 3-88
+CDSI
Unsolicited Response (New
SMS-STATUS-REPORT
Indication).
Page 3-88
+CEER
This command returns an
extended error report containing
one or more lines of information
text <report>, determined by the
manufacturer, providing reasons
for errors. The errors are call
clearing codes.
Page 3-213
+CFSN
This command is used to
query the manufacturing
serial number
.
Page 3-5
+CFUN
This command shuts down the
phone functionality of smart
phones and PDAs with phone
capabilities.
Page 3-141
+CGACT
This command
activates/deactivates the PDP
Context.
Page 3-245
+CGATT
This command attaches the
G24-L to the GPRS network.
Page 3-237
+CGCLASS
This command sets the GPRS
mobile station class.
Page 3-231
+CGDCONT
This command specifies the PDP
(Packet Data Protocol) context.
Page 3-232
+CGMI
This command requests
manufacturer identification.
Page 3-1
+CGMM
This command requests the
model identification.
Page 3-2
+CGMR
This command requests the
revision identification.
Page 3-3
+CGPADDR
This command reads the
allocated PDP addresses for the
specified context identifiers.
Page 3-238
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page