AT Commands Alphabetical Summary
A-14 G24-L AT Commands Reference Manual April 15, 2008
+MSCTS
This command defines the
behavior of the CTS line when
the G24-L is in Sleep mode.
Page 3-205
+MSDNS
This command sets/reads DNS IP
address for each socket.
Page 3-299
+MTCTS
This command sets the CTS pin
of the RS232 to not active (high),
waits one second and then returns
the CTS to active (low).
Page 3-135
+MTDTR
This command checks and
outputs the physical current
status of the DTR pin of the
RS232.
Page 3-134
+MTKA
This command sends
acknowledge response from the
user (TE) to the STK.
Page 3-274
+MTKC
This unsolicited event notifies the
terminal when supplementary
services, SMS Control or Call
Control are modified.
Page 3-274
+MTKE
This command enables/disables
the SIM ToolKit functionalities.
Page 3-257
+MTKM
This is both a command and an
unsolicited event. The command
selects items from the menu.
Page 3-272
+MTKP
This is both a command and an
unsolicited event. The command
responds to an unsolicited event.
Page 3-258
+MTKR
This command displays the
profile that is downloaded from
the G24-L to the SIM during the
SIM initialization process.
Page 3-247
+MTTY
This command is used to
enable/disable the TTY (Tele
Typewriter) support in the G24.
Page 3-57
+MVC
This AT command is used to
choose and configure the
priority order of the supported
voice codecs (vocoders).
Page 3-38
+TPIN
This command queries the
number of remaining SIM
PIN/PUK entering attempts.
Page 3-182
+VTD
This command handles the
selection of tone duration.
Page 3-175
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page
To Next Page
Loading...
