Motorola MC9500-K - Bluetooth Power States; Cold Boot; Warm Boot; Suspend

7 - 4 MC9500-K Mobile Computer User Guide
Table 7-2 list the COM ports available for the StoneStreet One Bluetooth stack and the Microsoft Bluetooth stack.
Bluetooth Power States
Cold Boot
With StoneStreet One Bluetooth Stack
Performing a cold boot on the MC9500-K turns off Bluetooth after initialization (which takes a few moments). It is
normal to see the Bluetooth icon appear and disappear, as well as a wait cursor, when initialization proceeds in all
modes.
With Microsoft Bluetooth Stack
Performing a cold boot retain the state of the Bluetooth radio prior to the cold boot.
Warm Boot
With StoneStreet One Bluetooth Stack
Performing a warm boot on the MC9500-K turns off Bluetooth.
With Microsoft Bluetooth Stack
Performing a warm boot retain the state of the Bluetooth radio prior to the warm boot.
Suspend
When there is an active Bluetooth connection, the Bluetooth radio goes into low power mode maintaining the active
connection. When there is no active connection, the Bluetooth radio turns off.
With StoneStreet One Bluetooth Stack
Table 7-2 COM Ports
Microsoft Bluetooth Stack StoneStreet One Bluetooth Stack
COM5 COM5
COM9 COM9
COM11
COM21
COM22
COM23
NOTE If there is an active Bluetooth connection between the MC9500-K and another Bluetooth device, the
MC9500-K will not timeout. However, if the user presses the Power button on the MC9500-K, the MC9500-K
will suspend (except when on a call) and upon receiving data from a remote Bluetooth device, the MC9500-K
will wake from suspend mode. For example, headset redial or Bluetooth scanner sending data to the
MC9500-K.