Using Bluetooth 7 - 5
With Microsoft Bluetooth Stack
Resume
When the MC9500-K resumes, Bluetooth turns on if it was on prior to suspend.
Using Microsoft Bluetooth Stack
The following sections provide information on using the Microsoft Bluetooth stack.
Turning the Bluetooth Radio Mode On and Off
Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When the
radio is off, other Bluetooth devices cannot see or connect to the MC9500-K. Turn on the Bluetooth radio to
exchange information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in close
proximity.
Enabling Bluetooth
To enable Bluetooth:
1. Tap Wireless Manager and then tap the Bluetooth bar or
Tap Start > Setting > Connections > Bluetooth icon > Mode tab.
Figure 7-2
Bluetooth Mode Tab
2. Check the Turn On Bluetooth checkbox.
3. Tap ok.
NOTE If there is an active Bluetooth connection between the MC9500-K and another Bluetooth device and there is
no data activity, the MC9500-K will timeout. However, if the user presses the Power button on the MC9500-K,
the MC9500-K will suspend (except when on a call) and upon receiving data from a remote Bluetooth device,
the MC9500-K will wake from suspend mode. For example, headset redial or Bluetooth scanner sending data
to the MC9500-K.
NOTE To achieve the best battery life turn off radios not in use.
To Next Page
Loading...
