Using the MC9500-K 3 - 5
Figure 3-4
Unlock Device Window
Tap Unlock on the Unlock window.
Password Locking
Use the Password window to set a password to disable unauthorized access to the MC9500-K.
1. Tap Start > Settings > Personal tab > Lock icon > Password tab.
Figure 3-5
Password Window - Password Tab
2. Select Prompt if device unused for check box to enable password protection.
3. From the drop-down list, select a time value for the protection to take affect after non-use.
4. From the Password type: drop-down list, select either Simple PIN or Strong alphanumeric.
5. For a simple password, enter a four-digit password in the Password field.
For a stronger password:
NOTE You can make emergency calls even when the MC9596-K or MC9598-K is locked. See Making an Emergency
Call on page 5-10 for more information.
NOTE If the device is configured to connect to a network, use a strong (difficult to figure out) password
to help protect network security. Password cracking tools continue to improve and the
computers used to crack passwords are more powerful than ever.
To Next Page
Loading...
