Motorola MC9500-K - Battery Charging and Operating Power

Accessories 8 - 17
Figure 8-15 Auto Charge Cable
Figure 8-16 Cable Installation
Battery Charging and Operating Power
The communication/charge cables can charge the MC9500-K battery and supply operating power.
To charge the MC9500-K battery:
1. Connect the cable power input connector to the Motorola approved power source.
2. Align the cleat on the cable with the interface pocket on the back of the MC9500-K.
The MC9500-K amber Battery Status LED indicates the MC9500-K battery charging status. The 4800 mAh
battery charges in less than six hours. See Table 1-1 on page 1-8 for charging status indications.
3. When charging is complete, press the release button up and remove the cable from the MC9500-K.
Vehicle Adapter Module
Release Button