7 - 6 MC9500-K Mobile Computer User Guide
Disabling Bluetooth
To disable Bluetooth:
1. Tap Wireless Manager and then tap the Bluetooth bar or
Tap Start > Setting > Connections > Bluetooth icon > Mode tab.
2. Un-check the Turn On Bluetooth checkbox.
3. Tap ok.
Discovering Bluetooth Device(s)
The MC9500-K can receive information from discovered devices without bonding. However, once bonded, the
MC9500-K and a bonded device exchange information automatically when you turn the Bluetooth radio on. See
Bonding with Discovered Device(s) on page 7-34 for more information.
To find Bluetooth devices in the area:
1. Ensure that Bluetooth is enabled on both devices.
2. Ensure that the Bluetooth device to discover is in discoverable and connectable modes.
3. Ensure that the two devices are within 30 feet (10 meters) of one another.
4. Tap Start > Settings > Connections tab > Bluetooth icon > Devices tab.
Figure 7-3
Bluetooth - Devices Tab
5. Tap Add new device. The MC9500-K begins searching for discoverable Bluetooth devices in the area.
To Next Page
Loading...
