9 - 10 MC9500-K Mobile Computer User Guide
Single Slot Battery Charger
Four Bay Ethernet Cradle
Table 9-4
Single Slot Battery Charger
Symptom Possible Cause Action
Spare battery is not
charging.
Battery not fully
seated in charging
slot.
Remove and re-insert the spare battery in the cradle, ensuring it is
properly seated.
Battery inserted
incorrectly.
Re-insert the battery so the charging contacts on the battery align
with the contacts on the cradle.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
No power to
charger.
Ensure that power is applied to the charger. The Battery Status
LED flashes amber to indicate that the battery is charging.
Single Slot Battery
Charger is not
functioning
properly.
Replace the Single Slot Battery Charger.
Table 9-5
Troubleshooting the Four Bay Ethernet Cradle
Symptom Cause Solution
During
communication, no
data transmits, or
transmitted data was
incomplete.
MC9500-K removed
from cradle during
communications.
Replace MC9500-K in cradle and retransmit.
MC9500-K has no
active connection.
The Link LED flashes yellow if there is an active connection. See
Four Bay Ethernet Cradle on page 8-9
.
To Next Page
Loading...
