Motorola MC9500-K - Object Push Services Via Beam

Using Bluetooth 7 - 9
Object Push Services via Beam
Use the OBEX Push Service to send files and contacts to another Bluetooth device. To transfer files between the
MC9500-K and another Bluetooth enabled device:
1. Ensure that Bluetooth is enabled and discoverable on both devices.
2. Ensure that the two devices are within 30 feet (10 meters) of one another.
3. Tap Start > Programs > File Explorer.
4. Navigate to the file to transfer.
5. Tap and hold on the filename until the pop-up menu appears.
Figure 7-8 File Explorer Window
6. Select Beam File. The MC9500-K searches for Bluetooth devices in the area.
7. Tap Tap to send next to the Bluetooth device to send the file to. The MC9500-K communicates with the device
and send the file. When completed, Tap to send changes to Done.
Figure 7-9 Beam File Window
To transfer a contact between the MC9500-K and another Bluetooth enabled device:
1. Ensure that Bluetooth is enabled and discoverable on both devices.
NOTE You can only send files to a remote device using the Beam function.