Accessories 8 - 13
Vehicle Battery Charger
This section describes how to use the Vehicle Battery Charger.
Charging the Battery
To charge a spare battery:
1. Ensure that the charger is connected to power.
2. Insert the spare battery into the slot to begin charging.
Figure 8-10
Vehicle Battery Charger
The charging status is indicated on the front of the battery. See Table 2-7 on page 2-12 for charging status
indications. The 4800 mAh battery fully charges in less than six hours.
To remove the battery, press the release button. The battery ejects from the charger.
Release Button
To Next Page
Loading...
