SUPREMATouch
20
Operation of the System
MSA
US
Entering System Parameters
The TFT display touchscreen is used to select data for editing or to enter data. At the top of the
screen is a menu, in which an item can be selected by simply tapping it. Tap the up-arrow to return
to the higher level menu. If the menu bar contains more entries than can be displayed on the
screen, this is indicated with additional arrow button [left/right] in the menu bar.
A window can contain input fields, static fields, check boxes, buttons, etc. All types of controls are
used by just touching them.
Fig. 3 Menu list and input
The following types of interactive controls are available:
Buttons
Buttons trigger actions. They are used by just touching them.
Selection Fields
Selection fields contain a list of possible values that can be selected. By tapping an item, a new
window pops up and shows all available values. To select a new value, tap it and press the “OK”
button.
To Next Page
Loading...
