SUPREMATouch
216
Startup
MSA
US
To complete your configuration go back to the "System overview" page by clicking the "Ready"
button. Store the changes by clicking the "Save" button.
Sending a system configuration
To send a system configuration you must select a working dataset in the "SUPREMA Data Selec-
tion" area. Open the connection to your already physically connected SUPREMA with the "Con-
nect" button in the "SUPREMA connection" area. When connected change the user level to
"Configuration" in case no keyswitch is set. (Attention: The "Configuration" password is required
here!) Open the "Configuration > System > Overview" page by pressing the "Configuration >
System" node in the tree view.
Fig. 162 System overview
Press the "Upload Configuration" button to send the configuration to the SUPREMA. After upload
completion the connection is closed automatically.
To activate the uploaded configuration the SUPREMA must be restarted by shutting the
SUPREMA OFF and ON again.
To Next Page
Loading...
