SUPREMATouch
66
Operation of the System
MSA
US
Each entry includes the following data [if applicable; scroll to see all]:
- Date/Time of accepting and closing the calibration menu
- Gas types for zero and, if applicable, test gases [not used for bridge current setting]
- Gas concentrations for the zero and, if applicable, test gases [not used for bridge current set-
ting]
- Measured values for the zero and test gases
- Difference signal Ux for the zero and test gases [relevant for calibration only]
- Reference value [relevant for pre-settings only]
System Events history
This history stores the system failures and start messages.
Each entry includes the following data:
- Date/Time that the event occurred
- Brief description of the event type
- Additional hexadecimal description of event. [For use by MSA service personnel.]
By double-tapping an entry a window opens containing a detailed error description in plain text.
Alarm events history
In this history, alarm events, acknowledge and reset are saved.
An entry is made up of the following data:
- Date/time of the event
- Brief description of the event
Fig. 38 Alarm events history”
To Next Page
Loading...
