HYDROCAL 1005 Manual for Installation and Operation Page 96/111
5.12 View of results
To view measured results read out, you must select the „History“ field of the respective transformer.
Three operation elements are available (see below picture)
5.12.1 Sensor selection
This window shows the different sensors available on the HYDROCAL unit. Besides the sensor
name, the last measuring value is displayed; this means after having read-out data this is the last
measured value. On the left of the sensor name is an activation mark (e.g. : H2 sensor is acti-
vated for data presentation). By double clicking on a sensor name, the sensor is activated / deacti-
vated for presentation. In this case, the left vertical scale is used. Open by a right mouse button click
on a sensor name the menu for allocation to different Y-axis or deactivation as well as to change the
color.
5.12.2 Time range selection
The time range for presentation is selected in two steps.
Selection of the time range the field „Time Span“. Available are:
1 hour, 2 hours, 3 hours, 6 hours, 12 hours, 1 day, 2 days, 3 days, 1 week, 2 weeks, 3 weeks, 1
month, 2 months, 3 months, 6 months, 1 year, 2 years and all data.
Selection of date of start by mouse click on a date. Using arrow buttons in the calendar dialogue,
the following or the next month is presented.
To Next Page
Loading...
