MTS Systems FlexTest SE Service Information

Calibrating an Extensometer
Model 493.02 Controller Service
Calibration
183
9. On the Linearization Data window, enter the calibrator readout
values and corresponding conditioner feedback readings for all
command points previously recorded on a separate sheet.
Stand-Alone— Path: Setup > Strain > Calibration > Cal Type >
Gain/Linearization > Linearization Data
Automated— Click Linearization Data on the Calibration tab.
10. Turn on system hydraulics.

MTS Systems FlexTest SE Specifications

General

Brand	MTS Systems
Model	FlexTest SE
Category	Controller
Language	English