MTS Systems FlexTest SE Service Information

Installing the Plug-in Modules
Model 493.02 Controller Service
Installation
29
493.47 Encoder Processes the signals from an encoder or a Temposonics III
transducer with an SSI interface.
493.48 Acceleration Conditioner Processes the signals from an accelerometer. Each
Acceleration Conditioner daughter board can support up to
three accelerometers. Before installing this board, specific
jumpers must be set on the I/O Carrier module. See
“Accelerometer Connections” on page 55 for more
information on jumper settings.
Model 493.40 I/O Carrier Daughter Boards (part 2 of 2)
M
ODEL MODULE NAME FUNCTION

MTS Systems FlexTest SE Specifications

General

Brand	MTS Systems
Model	FlexTest SE
Category	Controller
Language	English