Adding the Printer on the CUPS Administration Web page
2-9
5 Enter the [Printer name],
[Location], and [Description],
and then click [Continue].
6 Select a Device Port from the
[Device] list, then click [Con-
tinue].
- TCP/IP: [AppSocket/HP
JetDirect], [Internet Printing
Protocol (http)] or [LPD/LPR
Host or Printer]
- USB: [USB Printer #1]
7 For a USB connection, skip
to step 9. Enter the device
URI in the following form:
socket://<Printer IP or Printer
Hostname>[:port]
" Example:
Using Printer IP - socket:/
/192.168.1.190:9100
Using printer Hostname -
socket://Hostname:9100
Hostname may be substi-
tuted by IP Address, and
Port is optional.
8 Click [Continue].
9 Select [GENERIC], click
[Continue].
" A ppd file for each lan-
guage is available in the
corresponding "Drivers/
LinuxPPD/<language>"
folder on the CD/DVD.
Use the appropriate ppd
file for the language.
To Next Page
Loading...
Need help?
General
