Specifying Printer Driver Settings2-14
Image Options
[Black Over Print] Specify whether black objects are printed
(superimposed) on a neighboring color in
order to prevent white space around black
characters or figures.
If [Text/Figure] is selected, superimposed
printing is applied to text and graphics.
If [Text] is selected, superimposed printing is
applied to text.
îš„ The default setting is [Off].
Parameters Settings
[Image RGB Source] Specifies RGB source for image as [None],
[sRGB], [Adobe RGB (1998)], [Apple RGB],
[ColorMatch RGB], or [Blue Adjust RGB].
îš„ The default setting is [sRGB].
[Image RGB Intent] Specifies RGB intent for image as [Vivid],
[Photographic], [Relative Color], or [Absolute
Color].
îš„ The default setting is [Photographic].
[Image RGB Gray Treat-
ment]
Specifies the RGB Gray Treatment as [Com-
posite Black], [Black and Gray], or [Black
Only].
îš„ The default setting is [Black and Gray].
[Image Halftone] Specifies the halftone for image as [Line Art],
[Detail], or [Smooth].
îš„ The default setting is [Detail].
[Image Edge Enhance-
ment]
Select whether image edges are empha-
sized.
îš„ The default setting is [Off].
Parameters Settings
To Next Page
Loading...
Need help?
General
