Configuring the Printer8-38
[Notification Settings]
" This menu item appears only if the user has logged on to Administra-
tor mode.
[Status Notification Settings]
The [System] - [Notification Settings] - [Status Notification Settings] window
allows you to configure the following items:
Item Description
[IP Address] [Notification
Address]
Specify the IP address of the SNMP trap
receiver. An IPv4 or IPv6 address or a
host name can be specified.
Range: Up to 63 characters
Default: [0.0.0.0]
[Port Number] Specify the port number of the SNMP
trap.
Range: 1 - 65535
Default: [162]
[Community
Name]
Specify the community name for the
SNMP trap.
Range: Up to 15 characters
Default: [public]
To Next Page
Loading...
Need help?
General
