Specifying Printer Driver Settings2-16
Simulation
Banners
[Graphics Halftone] Specifies the halftone for graphic as [Line
Art], [Detail] or [Smooth].
The default setting is [Detail].
[Graphics Edge Enhance-
ment]
Select whether graphic edges are empha-
sized.
The default setting is [On].
Parameters Settings
[Simulation Profile] Specifies the simulation profile as [None],
[SWOP], [Euroscale], [Commercial Press],
[DIC], [TOYO], or [Japan Color].
The default setting is [None].
[Match Paper Color] Specifies the Match Paper Color.
The default setting is [Off].
[CMYK Gray Treatment] Specifies simulation gray treatment as [Com-
posite Black], [Black and Gray], or [Black
Only].
The default setting is [Composite Black].
Parameters Settings
[Starting Banner] Specifies the starting banner as [none], [clas-
sified], [confidential], [mls], [secret], [selinux],
[standard], [te], [topsecret], or [unclassified].
The default setting is [none].
[Ending Banner] Specifies the ending banner as [none], [clas-
sified], [confidential], [mls], [secret], [selinux],
[standard], [te], [topsecret], or [unclassified].
The default setting is [none].
Parameters Settings
To Next Page
Loading...
