Printing With NetWare3-4
For Print Server Mode With NetWare 4.x Bindery
Emulation
" Before using bindery emulation, check that bindery emulation is com-
patible with the NetWare server.
1 From a client computer, log on with Supervisor permissions to access the
NetWare server where the Pserver is registered.
2 Start up Pconsole.
3 From the [Available Options] list, select [Quick Setup], and then click the
[Enter] button.
4 Enter the appropriate names in the [Printer Server Name], [Printer Name],
[Print Queue Name], and [Print Queue Volume] fields, select [Other/
Unknown] from the [Printer type] field, and then save the specified set-
tings.
5 Click the [Esc] button to quit Pconsole.
6 In Administrator mode of Web Connection, select [NetWare Settings].
from the [Network] tab, and then specify the following settings.
– [IPX/SPX]: Select [Enable].
To Next Page
Loading...
Need help?
General
