Logging on to Web Connection8-10
Language Setting
If necessary, the display language used for Web Connection can be changed.
Public User Mode
In Public User Mode, you can view configuration settings but not change
them.
1 Select [Public User].
2 Click the [Log in] button.
Registered User Mode
In Registered User Mode, you can view configuration settings but not change
them.
User Authentication Mode
" To enter User Authentication Mode, log on in Administrator mode, set
[User Authentication] (in the [Security] - [Authentication] - [General
Settings] page) to [Device] or [External Server], and then register a
new user in the [Security] - [Authentication] - [User List] - [New Regis-
tration] page. For details, refer to “[General Settings] (shown above)”
on page 8-43 and “[User List] ([New Registration]/[Edit])” on
page 8-46.
1 Select [Registered User].
To Next Page
Loading...
