Configuring the Printer 8-181
[Network] tab
This tab allows you to configure network settings. For more information on
these protocols, refer to chapter 7, "Network Printing".
" The [Network] tab appears only if the user has logged on to Adminis-
trator mode.
[General Settings]
[Ethernet Settings] (shown above)
The [Network] - [General Settings] - [Ethernet Settings] page allows you to
configure the following items.
Item Description
[Speed/Duplex] Select the operating mode and speed for Ethernet.
Choices: [Auto], [10Base-T (Half)], [10Base-T
(Full)], [100Base-TX (Half)], [100Base-TX (Full)],
[1000Base-T (Full)]
Default: [Auto]
Configuration menu equivalent:
[Admin Settings] - [Ethernet] - [Network
Speed]
To Next Page
Loading...
