[Ethernet] (Admin Settings)5-4
[Ethernet] (Admin Settings)
If the machine is connected to a network, the following settings should be
specified.
For details about each setting, contact your network administrator.
Item Description
[TCP/IP] Specify settings for the machine's network connec-
tion (TCP/IP).
[Enable] Select whether or not to enable TCP/IP.
Default: [Yes]
" If [No] is selected, the TCP/IP parameters
do not appear.
[IP Address] Specify the IP address used by this machine on
the network.
[Subnet Mask] Specify the subnet mask.
[Gateway] Specify the gateway address.
[DHCP] If there is a DHCP server on the network, select
whether the IP address and other network infor-
mation are automatically assigned by the DHCP
server.
Default: [OFF]
[BOOTP] If there is a BOOTP server on the network, select
whether the IP address and other network infor-
mation are automatically assigned by the BOOTP
server.
Default: [OFF]
[ARP/PING] Select whether or not the ARP/PING command is
used when the IP address is assigned.
Default: [OFF]
[HTTP] Select whether or not to enable HTTP.
Default: [Enable]
[FTP] Select whether or not to enable the FTP server.
Default: [Enable]
To Next Page
Loading...
Need help?
General
