Muratec MFX-C3035 - TCP Socket Settings]

Configuring the Printer 8-233
[TCP Socket Settings]
[TCP Socket Settings]
The [Network] - [TCP Socket Settings] - [TCP Socket Settings] page allows
you to configure the following items.
Item Description
[TCP Socket] Select whether or not the TCP socket is used.
Choices: [Enable], [Disable]
Default: [Enable]
[Port Number] Specify the port number.
Range: 1 to 65535
Default: [59158]
" The currently used port number cannot be
specified.
[SSL/TLS] Select whether or not SSL/TLS is used.
Choices: [Non-SSL Only], [SSL Only]
Default: [Non-SSL Only]