Limiting users of this machine (Windows domain or workgroup authentication)
6-21
[Default Function Permission]
Specify the default function permissions for users authenticated with the
external server.
For details, refer to “[Default Function Permission]” on page 6-14.
[WINS Settings]
In order to start NTLM authentication via the router, WINS server settings
must be specified.
For details, refer to “[WINS Settings]” on page 8-216.
[Direct Hosting Settings]
In order to perform NTLM authentication in an IPv6 environment, the Direct
Hosting service must be enabled.
For details, refer to “[Direct Hosting Settings]” on page 8-219.
To Next Page
Loading...
